I/O's aligned top/outside D-Tools Schematic Blocks Forum › Forums › Autocad › Blocks › I/O's aligned top/outside D-Tools Schematic Blocks Tagged: AutoCAD, d-tools, feedback, I/O, I/O's, inputs, outputs, schematics, SI This topic contains 1 reply, has 2 voices, and was last updated by Vic 2 years ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts December 13, 2016 at 10:43 am #12260 jimmy WrightParticipant In a drawing, Schematic blocks stack outputs on the bottom of the block, as opposed to the top. Can this be changed please? Schematics generally have i/o’s aligned top/outside or middle/outside ex. of how it currently is PHOENIX-5—-AUD L/R—-INPUT 1 PHOENIX-5—-AUD L/R—-INPUT 2 PHOENIX-5—-AUD L/R—-INPUT 3 PHOENIX-3—-AUD L/R—-OUTPUT 1 PHOENIX-5—-AUD L/R—-INPUT 4 PHOENIX-3—-AUD L/R—-OUTPUT 2 This topic was modified 2 years ago by Vic. Reason: fixed tittle This topic was modified 2 years ago by Vic. March 30, 2017 at 11:04 pm #12477 VicModerator Jimmy, We will consider your feedback. If there is anything else you want to contribute, please be free to comment. Thanks, ViC Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.